All converters

Home › Viscosity (kinematic)

Viscosity (kinematic) converter

Dynamic viscosity divided by density — what oil grades measure. 6 units, converted from one table of exact factors.

1 square meter/second in every other viscosity (kinematic) unit

Computed by the same engine that runs the converter above, so these can never drift apart from it.

FromEqualsUnit
1 square meter/second1,000,000square millimeter/second (mm²/s)
1 square meter/second10,000stokes (St)
1 square meter/second1,000,000centistokes (cSt)
1 square meter/second10.76391042square foot/second (ft²/s)
1 square meter/second1,550.0031square inch/second (in²/s)

What each unit actually is

Most converters give you a number and stop. Where a figure is exact by definition we say so, and where it is an average or shifts with conditions we say that too — that is usually the thing you needed to know.

UnitSymbolWhat it actually is
square meter/secondm²/sSI.
square millimeter/secondmm²/sIdentical to the centistoke. Motor oil grades are quoted here.
stokesStThe CGS unit.
centistokescStWater is about 1 at 20°C.
square foot/secondft²/sExact.
square inch/secondin²/sExact.

Every converter on the site